Converting JPG (and other graphics) to PES (and other embroidery design formats)

As a digitizer, some of the questions I’m frequently asked are, “How do I convert a JPG to a PES file?  What software do you recommend for creating my own designs?”  I usually answer by letting the person know that there’s not really a way to simply “convert” a graphics format to an embroidery format and end up with a usable design.  They are two totally different types of files.  Graphics files are made up of shapes and objects (vector) or pixels (raster/bitmap) and embroidery files are made up of stitch commands that tell the machine when to start, stop, change colors, what length of stitch, what direction, and many other variables.  Graphics files need to be digitized for embroidery, preferably by a skilled and experienced digitizer.  IMPORTANT:  Before digitizing an image or having it digitized or tracing it for any other use, please, please, please be sure you have the proper license/permission from the artist.  Not only is it respectful, it will prevent expensive and time-consuming legal troubles down the road.

Ahhh, but there *is* a way to convert and it’s called auto-digitizing and there are quite a few programs out there (and even machines!) promising to easily convert your graphics to embroidery files with a few clicks.  Prices range from a few hundred to a few thousand dollars.

I know from interacting with customers that many crafters who are familiar with vinyl and digital cutting are entering the embroidery world. These crafters are looking for a quick trace function similar to what exists in vinyl/graphics.

So, let’s look at some embroidery files that I created from high-quality vector .eps clipart.  I used Wilcom’s Embroidery Studio software which is a top-notch professional program.  If this was a raster file instead of a vector, some additional steps would need to be taken to reduce the number of colors in the design.  Some common raster graphic formats are jpg, png, bmp, and gif.  Some common vector graphic formats are eps, svg, dxf, ai, and cdr.

This design was auto-digitized.  This is what you can expect if you want to simply “convert” graphics to stitches.  I imported the graphic file into my Wilcom software and clicked around a few times to convert the image to stitches.  The software decided what type of stitch to use, what angles to use, what underlay to use, and so on. This is as simple as it gets.  What I ended up with had 6 colors but nearly 100 color changes so I sorted the colors into 9 steps and 6 colors since I planned to stitch this design.  This design took about 10 minutes to produce from start to finish.  The software pretty much did all the work.  To be fair, I also ran the same image through Brother’s PE-Design Software “Image to Stitches” function.  You can see the results HERE.  Birthday_Girl_Auto

Next, I took the same image and imported it into a new file in my software.  I didn’t convert or change anything.  I used the graphic as a guide to create my embroidery design.  I manually drew each element of the design and applied my own settings for start and stop, stitching order, stitch direction, stitch type, underlay, etc…  If you’d like to see that process we have a video you can watch HERE.  This took over an hour from start to finish (and I have nearly 10 years of digitizing experience and around 20 years of graphics experience).

Birthday_Girl_Manual

Let’s take a look at how these designs stitch.  I am going to use the same stabilizer, thread, materials, and technique for both designs so the only difference is the digitized file.  The stabilizer is a 2.5 oz cutaway, the material is knit t-shirt hooped with the stabilizer, the thread is 40wt polyester embroidery thread, and I used my usual Organ 75/11 EEBR needles on my Brother 6 needle embroidery machine.

Here’s the auto-converted design first.  There are jump stitches as a result of the software applying the lock stitch, trim, and jump settings instead of the digitizer (me).  The circles ended up being stitched over.  Very strange. IMG_0863

Stitching is gappy as a result of the software applying the settings for stitch direction, pull compensation, underlay, and density.

IMG_0864 IMG_0865

It really just doesn’t look very nice and since I didn’t apply the design settings myself, I don’t know if the software added the necessary tie offs that would keep this design from coming unstitched in the wash.

Auto1

Here’s the design that I manually digitized using my knowledge and experience.  My software is simply the tool that allows me to apply what I know about embroidery while creating the design.  The software didn’t do the work this time.  I did.  No crazy web of jump stitches to trim because I digitized the design to minimize jumps and also set the appropriate tie and trim settings.  Overall looks much nicer (in my opinion).

manual1

So, if you are interested in creating your own designs you should know that there’s no easy button, no tracing or converting is going to give you something usable unless it’s a very simple one or two color vector image (and in that case manual digitizing is still going to give you nicer results in about the same amount of time).  You have to ask yourself if you would rather use a professional digitizer to provide you with ready-to-stitch quality files or if you’re truly ready to invest financially in a digitizing program and then commit your time to learning digitizing concepts and applying them in your software.  Watch our video and if you decide that digitizing is something that interests you, look for a full, manual digitizing program that allows you to create the design yourself with your own settings instead of just auto-digitizing for you.  Look for a program with online support or dealer support.  Understand that your software is only a tool and that your knowledge of digitizing is what’s going to allow you to produce an awesome design.  I hear from SO many customers who invest time in digitizing software only to find themselves disappointed that the software doesn’t do the work for them.

I hope you enjoyed and learned from this post.  Happy Stitching!

Website:  www.LynniePinnie.com

Facebook

Facebook Group (freebies!):

Newsletter (more freebies!)

 

 

 

 

 

Opening SVG files in Cricut Design Space

I’ll spare you the suspense and start by saying that this post doesn’t really offer a specific solution to the problem with SVG files and Cricut’s Design Space software but there’s a response from Cricut at the end of the post that might answer some of your questions.

For the past 3 years or so, we have been including SVG files with some of our Lynnie Pinnie designs as an alternative to cutting fabric in the hoop. We also started offering some of our exclusive designs as cut files for your vinyl and paper crafting projects back in 2014.

Since we have offered these files, we’ve heard from a number of customers who can’t correctly import some of our files into Cricut’s Design Space program.  This program is supposed to open a variety of formats — including SVG, but the files either open as teeny, tiny black blobs or very distorted and unusable.  Unfortunately, what some customers have told me is that Cricut support tends to blame the file designer for these issues.  I can assure you that we are doing everything possible to create files that open correctly for all of our digital cutting customers!  The files are being saved with the right settings and are not corrupt.  We know that sizing is especially important when the files are used for cutting applique pieces.

There are a number of “fixes” on the internet, most of which involve opening and re-saving the files but none that I have found to work consistently.  I wanted to get straight to the root of the issue so I contacted Cricut support.  I explained that our files opened at the correct size and maintained design integrity in Silhouette software, Make the Cut software, Inkscape software, and several other popular programs.  They requested screen shots and files.

The first image shows how the design is previewed in Design Space before it uploads.  So far, so good!

CricutDS1

When I inserted the uploaded file into Design Space, this is what I got.  At first glance it looks like an empty canvas but the design actually imported at 0.11 inches!

CricutDS2

Cricut support suggested that I use the resize function to bring the design to a usable size and proportion.  Here is the result of that.  Obviously this file is not going to cut correctly.

CricutDS3

Here is the same file in Corel Draw.

Cricut1

This is Silhouette Designer Edition.

cricut4

Finally, here is Inkscape.

cricut5

Here is my conversation with Cricut support after I sent the files and screenshots that they requested.  I blurred the representative’s name because it’s not his fault that the software has issues and he did his best to help.

BLOGCricut2

BLOGCricut3

So, as you can see, there is currently no way to consistently open and use all SVG files in Design Space software.  Cricut recommends using 3rd party software as a workaround or to import a JPG or PNG file and work with that.  I hope that Cricut plans to improve the SVG import function with the next Design Space update!

Website:  www.LynniePinnie.com

Facebook

Facebook Group (freebies!):

Newsletter (more freebies!)