How to stitch Lynnie Pinnie Faux Chenille Fonts and Designs

Supplies needed:

  • Purchase this font and other chenille fonts and designs HERE
  • HTV: Heat transfer vinyl (Cricut brand iron on was used in this sample – available in many big box and craft stores). PEEL OFF PLASTIC CARRIER SHEET BEFORE STITCHING. Glitter and flocked vinyl are the easiest to tear away. We do not recommend smooth.
  • Tape
  • Your choice of embroidery thread, garment or blank, and appropriate stabilizer for your garment or blank. This is a dense font that you will need to stabilize well.
  • Optional – vinyl weeding tool
  • Optional – embroidery software. I used Embrilliance Essentials to set up my lettering, color sort my design, and print a template.
Heat Transfer vinyl. You will need to peel away the plastic carrier sheet before stitching.
My printed template and heat transfer vinyl with carrier sheet peeled back.

Let’s get stitching!

I hooped and stabilized my garment, and then stitched step 1, my placement stitch, in a color that closely matches the HTV.

Next, I laid the HTV over the placement stitch, making sure to cover all of the placement stitches. I used a bit of tape to hold it in place because the embroidery machine needle tends to lift and move the HTV. The HTV plastic carrier sheet has been removed.

The next step will be your tack down stitch. I used the same thread color again.

If you are stitching the larger faux chenille designs, stitches will go over the HTV to prevent bubbling so its important that your thread is a close color match.

After the vinyl was tacked down, I used my choice of thread colors for the letters and outlines.

The final stitch will be an outline around the letters. Again, I used a thread color that matches the HTV.

Now for the fun part!

Carefully peel away the excess HTV. You can use a vinyl weeding tool to help with small areas. If you stitch this font in a smaller size, like I did, you can leave the small areas that are inside the holes, for example, inside the letter “E”, or you can weed them out. It’s up to you!

Examples of small areas are circled in pink. Leave them or remove them – your choice!
Excess vinyl pulls away, no scissors or trimming required!

Final step – don’t skip this!

Once you have removed all of the excess vinyl, follow the instructions on the vinyl package to fuse the HTV to your garment or blank with a heat press or iron. USE A TEFLON SHEET OR PRESSING CLOTH TO PROTECT THE EMBROIDERY!

All done!

This font is such a great way to achieve a look that would be otherwise impossible (or at least VERY difficult) in a smaller size. Yes, it is a dense, higher stitch count design but personally, I would rather let the machine stitch this out than try to trim a piece of fabric this small with scissors. NO THANKS!

The stitches lie flat – the faux chenille look is achieved with a unique stitch pattern.

Feel free to Contact Us with any questions.

Happy Stitching!

13 thoughts on “How to stitch Lynnie Pinnie Faux Chenille Fonts and Designs”

  1. I have purchased the Faux Chenille Font. Looking forward to using it. What type of stabilizer do you recommend?

  2. I love this font! However, I am completely new to HTV and it took me five tries before I realized the carrier sheet mentioned in step one is on the FRONT. I expected it to be on the back and couldn’t ever find it. A little more description would be helpful for those of us who have never seen HTV before. Thanks for a great font!

  3. I purchased this font yesterday. How do I get it to do the stitch out for all of the letters first? It is doing the stitch out tack down then fill for 1 letter at a time. What am I doing or not doing for this to happen?

  4. I used Fusible glitter flex Ultra from Sew Inspired by Bonnie. It’s instructions are to iron it to fuse before you embroider on it. So my letter has bubble around it as it doesn’t fuse will after embroidering on it. Just a heads up for other people. I will have to get a different kind of fusible glitter vinyl. Put on list for the next trip to JoAnn’s Fabric. 🙂

  5. When stitching the Faux Chenille i type out Merry and it shows rainbows instead of the r. How do i change this?

  6. This font is beautiful. It would be helpful to let people know that the flower, castle, rainbow need to be loaded into your software as the lower case letters and if using BX fonts they are found under lower case letters. The font has to be typed in all uppercase letters.It may say this somewhere and I missed it. It was trial and error how I figured it out.

Leave a Reply

Your email address will not be published. Required fields are marked *